Why i can not to change the printer port to disabled of the panelview1000?
- Thread starter szzlz
- Start date
mgvol
Member
Do you have either the 2711-K10C3 or 2711-T10C3 PanelView's? If so, these models will not allow using the printer port for anything other than printing. You have to do upload/download via the DH-485 port(s).
Similar Topics
I have two identical machines running similar HMI projects, the only difference is one is done in FactoryTalk View Version 10 and the other is...
Hoping someone can give me some guidance or confirmation of what I need to do. We have a FactoryTalk SE program that I need to change the IP...
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4.
The PLC i am using is a compactlogix...
Greetings
I have a problem, my system is the following: wincc v8.0 (demo), logo8.3, abb m2m analyzer.
I created some pages to display the...
We had one go down. we have a new one.
Their emergency Number don't work.
The Model is TLSA046AAH-330N01-007
A catalog says we need software TET...