Cable between pc and OP25?
- Thread starter zanor
- Start date
marius
Member
- Join Date
- Apr 2005
- Posts
- 239
zanor said:
dunno if protool support it, but it should use MPI connection ... here's the datasheet
http://support.automation.siemens.c...lib.csFetch&nodeid=1142262&forcedownload=true
Similar Topics
Dear all,
I have fx3u series plc with built in rs422 port and usb-sc09-fx cable. I have a a hyperterminal like application to send and receive...
Hi all,
Hope this is not too off-topic,
The question:
Does anyone have an idea how much distance typically is available between the cable ducts...
This is the picture of the pro face 2301(old) & 4301(new) HMI’s , old communicating with Siemens S7 200 series, and I believe its using comm port...
Hey all,
I need to know which comm. cable will be needed at run time between PanelView Component C400 (2711C-T4T) to Micrologix 1200 ??
The PV...
Hi Everyone,
I need to know how to communicate panel view 600 plus with slc 5/03 via serial cable NC-13 if any body know this technique please let...