connect OP27 to S5 95U, 15 pins plug

brunovinyl

Member
Join Date
Dec 2005
Location
belgium
Posts
1
I have to make connection between OP27 and S5 95U . I have to make the cable, the are in different room. How and wich connection do i make, using the 15pins plug on the S5 and also using the 15 pins connector of the OP27.
I have to connect 8 cables i gues, but wich ones ?
Thanks for any helping lead; I'm very new in S5 and just start learning.
Brunovinyl
 
cable between s5 105u and op27

I have to make connection between OP27 and S5 105U . I have to make the cable, How and wich connection do i make, using the 15pins plug on the S5 and also using the 15 pins connector of the OP27.
I make cable between op27 and pc (25 pin to 9 pin) and work currectly.
Thanks for any helping lead;
 

Similar Topics

The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
160
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
95
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
107
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
339
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor? 30% seems...
Replies
5
Views
288
Back
Top Bottom