Omronc200hs-connect to NEc barcode scanner

CAn any one please help me .. How to use a LK201 -v unit with an C200HS Omron plc ..to receive data from a NEc barcode scanner ?
BArcode scanner is 9 pin RS232C port and LK201 -V 25 pin rs232 , where to get pin config for lk201 , and any example program ...
please help

Sorry, the LK201 unit will only communicate Hostlink. Only option to connect a barcode reader to this cpu would be an ASCII/BASIC module.

It might be worth thinking about upgrading the processor to a CS1. You could reuse the IO modules and the barcode scanner could connect to the RS232 port on the cpu.

Hope this will help.

If you have CPU21 or CPU31, the built-in host link port will work. This will not work with a CPU01.