FF and Profibus Fieldbuses

sherman4

Member
Join Date
Jun 2002
Posts
46
Hello,

I have been researching standard fieldbuses lately but I have not been able to find a comparative table or a technical analysis between Profibus DP (and PA) and Foundation Fieldbus.

If anyone has links, PDF literature or some readings that compare between Foundation fieldbus and Profibus (both advantages and disadvantages), I greatly appreciate sharing them with me.

Thank you very much.
 
Hello sherman;

The following document is produced by the Fieldbus Foundation, so take it's declared advantages over Profibus PA with a grain of salt (a French expression meaning "keep an open mind" or "remember the source"). That being said, there are some good basic comparison between the 2 technologies: (Sorry, you'll hve to download it yourself, the pdf file is too large for the site)

http://www.fieldbus.org/endusersupport/enduserpresentations/singapore05/presentations/fieldbus%20comparison.pdf

This should give you a good start.

Hope it helps,
Daniel Chartier
 
Hello again, sherman;

Another, more complete link you might follow is Emerson's Plantweb University;
http://plantweb.emersonprocess.com/University/default.asp

Once you register, you can access their excellent training tools, incuding a section on "Selecting the right bus" that gives great details on Profibus PA and FF.

Please take into consideration that Emerson is a Fieldbus Foundation vendor....

Hope this helps,
Daniel Chartier
 

Similar Topics

Hi, I was noticing that Profibus connectors have 2 ports on them that can house 2 separate cables. Can I use 2 cables with Profibus signals...
Replies
4
Views
176
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
79
I am trying to implement a profibus network and am a newbie in the automation and communication industry. what are the components required for the...
Replies
1
Views
103
Hi, I am using TIA Portal V18. I have imported a (v5.7) SIMATIC manager project via device proxy. I have created a HMI project (TP700) in TIA...
Replies
2
Views
319
Hi Folks, I am new to the S7-300 and the whole Profibus communication. And I just wonder that can you connect a S7-300 module to a Beckhoff Bus...
Replies
1
Views
318
Back
Top Bottom