Has anyone out there used these?
I have a drive that appears to be stalled in the communicate mode.
I connected to my computer using a Radio Shack Serial port emulator. The Brumater program could not find com 6 so it faulted. I then tried to start the drive and it tried to search for the home position but there was no voltage to the motor.
I guess I need to know how to (after I configure com 6) command it to go back to running it's origional program.
Thanks
George
I have a drive that appears to be stalled in the communicate mode.
I connected to my computer using a Radio Shack Serial port emulator. The Brumater program could not find com 6 so it faulted. I then tried to start the drive and it tried to search for the home position but there was no voltage to the motor.
I guess I need to know how to (after I configure com 6) command it to go back to running it's origional program.
Thanks
George