electro-craft 2000 pdm 30

BENG55

Member
B
Join Date
Jan 2018
Location
kentucky
Posts
1
does anyone have experience with these Reliant Electric servo drives? I get a green bus voltage light but no status light. on line manual says that would indicate no supply to logic. how do I check that? what are other possible causes?
 

Similar Topics

J
Software for Rockwell Electro-Craft Drive
Good morning, I have a problem I was hoping you could help me with. Our company bought a used piece of equipment and it has a Reliance Motion...
Replies
3
Views
3,248
JunkyCosmo
J
TimothyMoulder
Electro-Craft Antique Servo question
Hi everybody, Can someone tell me the distinction between an Electrocraft H-4050-P-H00AA servo, and an Electrocraft S-4050-P-H00AA servo? I've...
Replies
2
Views
2,560
Steve Bailey
Steve Bailey
C
Electro Craft IQ-550 P5 pinout.
I cant find the manual for an IQ-550! Allen Bradley/Rockwell used to have the old Electro Craft manuals in a legacy page but it seems they have...
Replies
4
Views
3,487
JeffKiper
JeffKiper
R
Electro-Craft DDM 019 Permanently "ENABLED"
Greetings everyone, I found this forum while Googling for servo info. I have an 019 and UltraWare but the drive is in what seems to be a permanent...
Replies
2
Views
2,168
Rascal
R
G
Electro-Craft BRA
Has anyone out there used these? I have a drive that appears to be stalled in the communicate mode. I connected to my computer using a Radio Shack...
Replies
0
Views
1,166
gas
G
Back
Top Bottom