mrmss
Lifetime Supporting Member
I would like to test an ASCII function to talk to a barcode scanner ahead of recieving the actual CLX processor and point i/o cards.
Just a quickie to see if anyone has sucessfully used the com port on their PC as the 'Channel 0 Serial Port' and send ASCII data out of it using RSLogix Emulate 5000.
When I configure a new controller I am give the option to specify a pc com port as 'Channel 0 Serial Port', so I choose com 1.
Com 1 is now unavailable to any other Windoze application and waiving my cursor over the controller looks thus:
All seems good, however, using a com port monitoring tool I can see that my Emulator is not sending anything out of the com port.
Also if i shutdown the emulator and start it again it looses com port configuration and I have to create a new controller everytime.
At this moment I am thinking if this is even a proper function of the emulator...I cant see it documented in any manuals.
Thanks for any help.
Just a quickie to see if anyone has sucessfully used the com port on their PC as the 'Channel 0 Serial Port' and send ASCII data out of it using RSLogix Emulate 5000.
When I configure a new controller I am give the option to specify a pc com port as 'Channel 0 Serial Port', so I choose com 1.
Com 1 is now unavailable to any other Windoze application and waiving my cursor over the controller looks thus:
All seems good, however, using a com port monitoring tool I can see that my Emulator is not sending anything out of the com port.
Also if i shutdown the emulator and start it again it looses com port configuration and I have to create a new controller everytime.
At this moment I am thinking if this is even a proper function of the emulator...I cant see it documented in any manuals.
Thanks for any help.