Using Report Designer in Siemens WinCC......

MartAnd

Member
M
Join Date
Feb 2006
Location
Stockholm
Posts
7
I have spent some time trying to read a text-file into my report but without any good result...
Is there anyone who knows how to do this? It should be done so that when I launch my report (just by a button-click) a dynamic table should read in the contents of say any predifined .txt.

Would be happy if someone has encountered and solved the same or a similar problem.

Regards Mårten.
 

Similar Topics

A
how to create a report using FT ME
Hi guys is it possible to create a report from FactoryTalk ME about system status, alarm , just like SE? how about FT View CE, it is a PC based...
Replies
1
Views
1,838
JaxGTO
JaxGTO
A
Report Printing in Cimplicity 8.2 using Microsoft Excel 2007
Can anyone guide me how to print a point current value in an excel spread sheet using Cimplicity. I`ve read the cimplicity help but to no avail.
Replies
3
Views
3,941
mikewest
M
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
T
Using Patch Panels in Control Panels
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
Replies
3
Views
124
nicherbert
N
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
222
Jkoso
J
Back
Top Bottom