I need help on getting correct response time on FX2N plc , I have installed 600R dummy resistors on the outputs , used REFF instruction and still my outputs crash out at any freq over 40Hz , I need to get an output of 400hz , surely this is not too fast ?? Would appreciate any info . Thanks
FX2N Response times
- Thread starter ohalld1
- Start date
Tmu
Member
According to manual:
Relay 10ms.
Triac < 1 ms OFF-ON; 10ms ON>OFF
Transistor <0,2ms (100mA 24VDC), but Y0 & Y1 < 15 ys (100mA/5V) OFF/ON
Transistor <0,2ms (100mA 24VDC), but Y0 & Y1 < 30 ys (100mA/5V) ON/OFF.
http://mitsubishi-automation-resource-mirror.de/resources/manuals/066014.pdf
Relay 10ms.
Triac < 1 ms OFF-ON; 10ms ON>OFF
Transistor <0,2ms (100mA 24VDC), but Y0 & Y1 < 15 ys (100mA/5V) OFF/ON
Transistor <0,2ms (100mA 24VDC), but Y0 & Y1 < 30 ys (100mA/5V) ON/OFF.
http://mitsubishi-automation-resource-mirror.de/resources/manuals/066014.pdf
Similar Topics
Dear all,
I have fx2n plc on my hand but I don't have the programming cable sc-09 and it would not be easy for me to get one. I need the cable...
Dear all,
what type of built in port does fx2n-80mr plc has? i mean is it rs232, r rs422 or rs485. and which module should i use to convert to...
Hello everyone,
I am currently facing a challenge while trying to connect two Weintek HMI units with a Mitsubishi FX2N PLC. When connecting a...
Hello
Im very new here with PLC world, i just buyed from amazon a FX2N-20MT, which I believe its a mitsubitshi clon, Im using gxworks2.
Well my...
I've worked on one Mitsubishi PLC in the past 40 years. Now, it looks like I get to tackle another one...using GX-WORKS3-C1 software which I...