1746-NR4 configuration

JamesWSY

Member
J
Join Date
Jul 2005
Location
Jakarta
Posts
81
Hi,,
I used 1746-NR4 module with 1000 ohm potentiometer. How to connect potentiometer to the module and how to configure it?
Thank you for help or idea from this forum.
James
 
JamesWSY said:
Hi,,
I used 1746-NR4 module with 1000 ohm potentiometer. How to connect potentiometer to the module and how to configure it?
Thank you for help or idea from this forum.
James
Click to expand...

A good place to start would be with the USER Manual...

After reading that come back if you have any further questions.
 

Similar Topics

S
SLC500 1746-NR4 Range Fault
I need help in identifying the fault with a 1746-NR4 RTD / resistance module. The hardware is a SLC500 1746-NR4 module inserted into slot 3 of a...
Replies
0
Views
1,290
stevieg
S
R
1746-nr4, rtd issues
This is my first run in with this setup. I've been all through the forums here searching for any information I can latch onto. Reading through...
Replies
10
Views
2,946
Ron Beaufort
Ron Beaufort
R
Looking for surplus 1746-NR4 (RTD input for SLC)
If anyone has one they'd like to sell, please PM me. Alternatively, if anyone has two temperature transmitters (4-20mA), please do the same. The...
Replies
0
Views
1,288
rguimond
R
ceilingwalker
1746-NR4 RTD Module Question
Good day all. I have an RTD module for a SLC500 5/03 that I can't get the temperature values to stop jumping from one temp to the next, on the HMI...
2
Replies
16
Views
4,674
ceilingwalker
ceilingwalker
504bloke
PT100 difference on 1746-NR4 Card ?
Hi Just programming and configuring an 1746-NR4 card for an SLC system on the Configure box drop down menu for Types of Input I have 2 sorts...
Replies
8
Views
13,968
Mickey
Mickey
Back
Top Bottom