device not responding

blackslipper

Member
B
Join Date
Nov 2005
Location
North Carolina
Posts
47
Hi

I am tryin to use the OPC Quick Client, however I am receiving the following error:

Siemens S7-200 Device 'Channel1.Device1' is not responding.



can anyone assist
 
Is this kepserver, if so you either have a setup problem in the opc server or your interface or lead is not connected correctly.
Check the comms settings, correct driver loaded etc.
 

Similar Topics

A
Codesys V3.5 SP17 Pach 1, Win V3 x64, "No device is responding..."
Hello. After installing the latest Codesys V3.5 SP17 Pach 1, Win V3 x64, on some of our Windows 10 workstations it is impossible to load a program...
Replies
1
Views
3,092
AlfredoQuintero
A
H
No device is responding as the online active keeper on this network
Hello everyone. Please I need help with configuration on my rsnetworx for controlnet. I get a message that says "No device is responding as the...
Replies
2
Views
2,753
Ravioli
R
R
[Kepserver] S7-300 "Device is not responding"
Hello guys! I have a problem with reading tags from S7-300 with 343 module. I checked siemens communication settings hundred times with kepserver...
Replies
1
Views
5,020
(8{)} ( .)
(8{)} ( .)
L
Using RAs IO Device Library with 1576-ENBT
Hi, I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...
Replies
0
Views
59
LabRat906
L
D
Siemens PLC download with IO device
Hey guys, I have to take an upload of a program on an S71200 PLC to change a hardware config option and then redownload the program with this...
Replies
3
Views
111
JesperMP
JesperMP
Back
Top Bottom