Siemens S5 CPU944 AND CP524

shaulapto

Member
Join Date
Feb 2004
Location
Raanana,Israel
Posts
53
Hi,

I have a Siemens S5 PLC with a CPU944(6ES5 944-7UA22) and a
CP524(6ES5 524-OAA41).
The CPU944 module without EPROM and the CP524 module with EPROM(6ES5 373-OAA41).
Could somebody explain me how this two modules work together?

Thanks,

Shaul
 
The CPU is the PLC brain, this is where the program is stored and executed. The CP524 is a serial communication card to interconnect the CPU to another device or printer.
 
Thank you for your reply.So the EPROM in the CP524 contains only a communication program and the main program is stored in the CPU944 RAM?
I am abble to access the CPU program with a programming tool like Step5.
How can I access the communication program stored in the EPROM?
 
The CP524 has a D type 25 female connector.Is this connector also used to download the program using the com535 software package you mentioned?
Do I need also a special programming communication cable?
Where can I find more information and documentation about CP524 and com535?
 
Last edited:

Similar Topics

The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
7
Views
130
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
141
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
Replies
19
Views
300
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
112
Hi everyone hope you'll well. Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
Replies
5
Views
198
Back
Top Bottom