AD H2-CTRIO Pulse Catch

bernie_carlton

Lifetime Supporting Member + Moderator
bernie_carlton
Join Date
Apr 2002
Location
Yakima, Washington
Posts
6,413
Attempting to use the Pulse Catch function of the H2-CTRIO. I see the input clearly but get no output, even when I stretch the output time to 1 second. I have also tied this fuction to an output. Nothing there either. Any suggestions?
 

Similar Topics

I
Encoder difficulties with H0-CTRIO(2) Module on DL05 PLC
Hi, I am trying to learn how to use my encoder with my PLC. I recently got a high-speed counter module (H0-CTRIO2) for my DirectLogic05 PLC. I...
Replies
5
Views
2,234
StoneMan
StoneMan
R
compactRIO vs controller+PLC for vision
Hi there, I have a vision project on that has been through some pretty major paradigm shifts since its inception. Without getting into too many...
Replies
5
Views
4,000
Resurgance
R
J
Automation Direct CTRIO driving Stepper Indexer
Hello all, I have come up against an issue trying to run a stepper motor using an Automation Direct H2-CTRIO2 module. Simply speaking, my setup is...
Replies
0
Views
2,689
jpn
J
J
Automation Direct H2-ctrio
Have an automation direct dl-260 cpu, and the above counting card. Have taken the signal from an existing encoder (1000 ppr) with only one signal...
Replies
1
Views
1,829
Johnny Rotten
J
E
DL06 and H0-CTRIO programming
Hi, I am a complete newbie when it comes to PLC programming and would love some help. I am trying to configure a machine consisting of a DL-06 plc...
Replies
2
Views
1,674
ECNERWAL
E
Back
Top Bottom