Printer Coms

Jezz

Member
Jezz
Join Date
Dec 2002
Location
Kendal
Posts
399
Hi,

we are currently looking in to automating data entry into our Domino A200 printers on site ,so that when a user selects a product on the PV1000 screen the system will look up in its internal database (on the PLC AB SLC5/05 ML1100) and then send the info to the printer .

Has any one got any experience of doing this either via ethernet?

Could realy do with some information of the Protocol Domino use with there printers.

Thanks
 

Similar Topics

P
OMNI FLOW COMPUTER TO HP PRINTER VIA ETHERNET
Has anyone installed Hp laserjet pro 4203 to OMNI 3000 or 6000 via ethernet..Is there a specific Config? I have a problem..Please advise
Replies
0
Views
72
Papou
P
C
Controlling "cab SQUIX 4 M" printer via Allen Bradley
I'm a Manufacturing Engineer with limited PLC experience and I am doing some research for our Controls Department. Does anyone have experience...
Replies
4
Views
216
Chaldaean
C
K
Omron CX-Programmer with Zebra ZT610 Printer Issues
Hello ! I am trying to use an omron cj2m-cpu33 with a CP1W-CIF01 plug in serial connector to talk to a zebra ZT610 printer. I am getting the data...
Replies
8
Views
437
kevilay
K
P
Arca Linerplus Printer/Applicator
Shot in the dark here, but a customer has this Arca Linerplus Advanced 4.0 printer/applicator for pallet-tagging and we need to change the mode on...
Replies
0
Views
140
phuz
P
R
Studio 5000 and Zebra Printer ZT411
Hi All, I currently have an issue to establish connection between my PLC to Zebra Printer. On my side don't have the ASCII card Module to use...
Replies
9
Views
828
Mowais1
M
Back
Top Bottom