Ti 425 Aka Ad 405.....?
- Thread starter XtremeIN
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
Page 8-8 of the current Automation Direct catalog lists a compatibility chart for DirectSoft5 software with GE, TI, and Simatic/TI models.
It appears that the 425, 430, and 435 model CPUs are compatible.
It appears that the 425, 430, and 435 model CPUs are compatible.
Similar Topics
Hi,
Has anyone connected a D425 drive to Kepware before? I've read you need to enable an OPC through scout. We have tried this, but cannot get...
DEAR ALL:
I NEED DATA FILES FOR ZR300 TO ZR700 AIR COMPRESSOR FOR ELEKTRONIKON MK3 (DFM4WIN)SOFTWARE.
CAN ANYONE SHARE IT TO ([email protected])...
Hi all,
I'm trying to bring info from a D425 into TOP Server (same as KepServer). All of the tags inside of the D425 are named variables...
Help me to read an analog value from Cpu 315 for simtion controller to control the speed of one of the servo motor over MPI.
If it is not possible...
Hello once again,
I know the TI 425 is pretty much the same as the AD/KOYO 405 line, but can the TI be programmed with Directsoft 4? If not what...