Problem to connecting toshiba plc with ethernet

navid007

Member
N
Join Date
Mar 2007
Location
TEHRAN
Posts
2
I can connect to toshiba with serial link and after that i set ip and load program to PLC but i can not connect with ethernet, anyone have any idea what is problem ?
my cable is cross, and firewall is off, is there any other setting that i miised it ?
Thanks Anybody
 

Similar Topics

C
Problem Connecting PV800 to Micrologix 1200/1100 w/o Ethernet
First of all Hi, nice to met you all. I have a problems trying to control my PLC's (1762-L40BWA ser. C and 1763-L16DWD ser. B) with the Panelview...
Replies
10
Views
5,053
syed_controls
S
F
NT11 - PC connecting problem
Hello! We have one Omron NT11-SF121B-EV1 display and CP1L PLC. I want to connect this display to computer and upload graphics with NT-series...
Replies
7
Views
2,339
gclshortt
gclshortt
O
Connecting to S7 300 CPU Problem
Greetings i do have a new Siemens PLC station with 314 CPU 1DP i try to connect using the PC adaptor Cable USB A2 i do have the Error message...
Replies
2
Views
2,239
Mike_RH
M
M
Problem connecting to CR30 Safety Relay via Studio 5000
Hi all Was wondering if you guys were able to help. I am onsite trying to program a 440C-CR30-22BBB Safety relay. Using the following pdf and...
Replies
5
Views
4,376
Mel_24
M
S
Problem connecting Twincat with CX9020
Dear Members: I am new to Twincat System. I am working on a project. I have connected CX9020 with my laptop through ethernet cable. I was able to...
Replies
2
Views
4,606
Vmkumar
V
Back
Top Bottom