SLC500 through 1747SCNR, possible?
- Thread starter tx4129
- Start date
No, you'll have to use the built in communications ports on the SLC processor. The SLC family does not have the same bridging capabilities that the ControlLogix family does. The SCNR communicates with the processor via M0 and M1 files. It also sends 32 words in and 32 words out.
Similar Topics
Hello,
The probem was resolved soon but I would like to know if anybody ever had this trouble or know what can be the cause of it.
An SLC500...
Would anyone have a quickstart type guide that could be used to show how to start up rslinx, connect to a new slc500 plc out of the box, and then...
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
can the slc500 5/05 send a email and text over Ethernet ?
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...