profibus with numatics g2-2

good day all!! i'm trying to integrate a numatics G2-2 valve pack to Siemens profibus. there is already a G2-2 installed and i want to add another one. i configured it in hardware config, moved the terminating resistor, plugged in cables and downloaded the new hardware config to the cpu but it's not seeing it. I have a
manual configuration module, and i set the node adress to 6 which is what i have in the hardware config. Can anyone help?

Wrong baudrate? Have you compiled the network in netpro?

i tried compiling in net pro, node 6 does not show up. doesn't baud rate select automatically?

The baudrate on the slave side must be the same value as programmed in step 7. Probably 1.5Mbit (Standard setting)

found the problem, terminating resistor in the wrong spot! thank you for your help!!

Sometimes problems are easy to solve, but you need to find it first. Good luck