Hi all,
Can I have the HMI to be on two different networks, DH and Ethernet and have the Wonderware talk to devices on different networks at the same time?
Originally, I have the two micrologix 1100 PLCs (on the enet network) going thru a enet card in a controllogix gateway and route msgs via a DH card to a plc5 (plc5 is on the dh network with the HMI). I keep on getting communication problems with glitches, msgs from those two micrologx 1100 weren't getting to the plc5 100% of the time, some msgs are timed out because of the glitches. This is why I want to separate the ML 1100 out to be a enet network to talk to the HMI directly.
Has anyone experenced similar problems with the glitches? I thought it may be the terminating resistor problem, but it wasn't. Any suggestion is appreciated. Thanks.
Jeff
Can I have the HMI to be on two different networks, DH and Ethernet and have the Wonderware talk to devices on different networks at the same time?
Originally, I have the two micrologix 1100 PLCs (on the enet network) going thru a enet card in a controllogix gateway and route msgs via a DH card to a plc5 (plc5 is on the dh network with the HMI). I keep on getting communication problems with glitches, msgs from those two micrologx 1100 weren't getting to the plc5 100% of the time, some msgs are timed out because of the glitches. This is why I want to separate the ML 1100 out to be a enet network to talk to the HMI directly.
Has anyone experenced similar problems with the glitches? I thought it may be the terminating resistor problem, but it wasn't. Any suggestion is appreciated. Thanks.
Jeff