DH485 Panelview

allscott

Member
allscott
Join Date
Jul 2004
Posts
1,332
I am looking to program a panelview 550 (2711B5A2) from my PC. The book for this says I need a PIC interface and a 1747 CP11 to do.

Can I use my PCMK and a 1784 PCM4/B cable instead?
 

Similar Topics

D
Micrologix 1100 and Panelview 800 DH485 communication
Hi all, I had a setup with 2 Micrologix 1100 connected to a Panelview C300 over DH-485. I was mandated to upgrade the HMI, and proposed to...
Replies
5
Views
889
DRB
D
K
Adding Duplicate Standard PanelView (not Plus) to SLC 5/04 PLC over DH485
Hello, We have an older machine that has a standard PanelView (2711-T10C3) connected over DH485 to a SLC 5/04 PLC via a 1761-NET-AIC module in...
Replies
1
Views
671
Ken Roach
Ken Roach
B
AIC+ WONT SEE THE DH485 Panelview 550
Hi Guys. I am trying to connect a Micrologix 1400 with the Panelview 550 (DH485). The laptop is connected through RS232 on the AIC+, ML1400 with...
2 3
Replies
35
Views
6,266
Mickey
Mickey
C
Help w/SLC505 DH485 Passthru for a Panelview Standard and Panelbuilder
Hello. Before I get chewed out, I did do a search on here for some SL505 passthru help. I noticed there was a small handful of information on...
Replies
6
Views
3,574
Ken Roach
Ken Roach
Y
Dh485 to panelview
I have used an RS232c to RS485 converter and connect it to RJ45 connector to connect with SLC500 485 channel communication using rslinx. It is...
Replies
9
Views
4,102
geniusintraining
geniusintraining
Back
Top Bottom