Moeller communication

I am new to this website and I have a question for the Moeller experts, I have never worked with this type of controller. I have a PS4-201 Moeller and I need to retrieve the program logic from it. I need to know what type of software and communication cable to order. Also a procdure to get online and retrieve the program. Your help would be a great, thanks.

Luke

Luke2 said:

I am new to this website and I have a question for the Moeller experts, I have never worked with this type of controller. I have a PS4-201 Moeller and I need to retrieve the program logic from it. I need to know what type of software and communication cable to order. Also a procdure to get online and retrieve the program. Your help would be a great, thanks.

Luke

Click to expand...

Hello i think you have to use software for moeller "sucosoft v5" or other versiyon.If you want to retrieve the programme from moeller plc to your pc you must have the same programme on your pc .İt's a bit difficult to use moeller because if you don't have the same plc programme on your pc you can't retrieve the backup.

Good luck

Dangelous is correct.

If you only need to move the program to another PLC or want to archive the program on a flash card, this is possible.

There is a very slim chance, if the PLC already has a flash card that there is a copy of the program on it. I konw this is possible w/ the PS4-341 but I don't know about the PS4-201? If there is a copy of the program on the flash card, then you could upload it and edit/change or go online with Sucosoft.