Klockner moeller

Hello please explain what are these commands mean

GOR



and


005 lmw2036
006 lmw2037
007 sys1
008 A
009 BC pu122
00216 pu122 "

Best regards

help

Which PLC adn programming system are you using?

GOR = Loads the contents of the auxillary register into the working register.
Operation is only permitted for BYTE sequances and only after multiplication or division.

For example if you have just used the division command the result is held in the working register and any remainder is held in the auxillary register.

LMW2037 = LOAD contents of Marker Word 2037 into wrking register