more specific now

juan

Member
J
Join Date
Apr 2003
Posts
50
I'm using the S7-200 HSC1 and HSC2 driven by the A and B of the our OMRON encoder.
I would like to preset the counter as a function of the position at the moment.Is it possible to use functions?????
 

Similar Topics

M
scrolling multiple strings again on display..I'll be alot more specific this time!!
I have 16 assembly lines (1 seperate PLC for each line). When a knob is turned on Line 1 for example, a 1 is moved to an integer file. The...
Replies
4
Views
5,824
cpmiller
cpmiller
C
PlantPax 3.2 P_Intlk but with more than 16 i terlockd
Hello, i need to use P_Intlk and feed the Status interlock OK bit to a P_DOut block. However, there's 17 interlocks for this output. How can I...
Replies
1
Views
108
Ken Moore
Ken Moore
L
CLEAR ALARM LIST REMOTE HMI CMORE EA9/EA5
Hi everyone, recently i worked with a cmore panel and have the question that how can clear alarm list whit remote form,right now only can with...
Replies
0
Views
107
luisrdgz27
L
A
Connect a single quadrature encoder to more than one input device
Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
272
Aure_PLCs
A
A
How to send more than 127 chars through 1734-232ASC?
Hello Friends I have took the sample program from AB webpage and modified, but I can only send 127 chars...
Replies
1
Views
181
Ken Roach
Ken Roach
Back
Top Bottom