Yokes9
Member
I have been trying to connect a SLC 5/04 (logics 500) and a AB PV Plus 600(ME). I use a null modem cable to connect to the computer to the PLC, a straight through serial cable from PLC to PV, and the PV to computer with an ethernet. I've been trying to get this to work off and on for some time now.
I need to figure out how to correctly set up a shortcut In RSview Studio ME. This is what my communication "Local" looks like.
(The computer browsed and found this all)
This is what my "Target" looks like.
(The serial DF1's I added myself while experimenting)
I'm not sure how to set this shortcut up so my PV and PLC will communicate (RS Studio is new here this year so no one knows how to set this up). I've writen the Programs for both devices and set up the binary. I don't have class again till monday but I'll check this at home tonight and tomorrow. Thanks!
I need to figure out how to correctly set up a shortcut In RSview Studio ME. This is what my communication "Local" looks like.
(The computer browsed and found this all)
This is what my "Target" looks like.
(The serial DF1's I added myself while experimenting)
I'm not sure how to set this shortcut up so my PV and PLC will communicate (RS Studio is new here this year so no one knows how to set this up). I've writen the Programs for both devices and set up the binary. I don't have class again till monday but I'll check this at home tonight and tomorrow. Thanks!