Han ID Module

yasirbc

Member
Y
Join Date
Jan 2007
Location
Ontario
Posts
20
I'm looking for a sample read / write program for the Han ID Module. It's working on the I2C communication Protocol. If some one has a sample program for I2C that'l help as well. Any AB Platform.

Thanks
 

Similar Topics

J
i2c Han Module with Rexroth
Hi , can anybody help with an issue. I have an Han ( ID MODULE) from Harting and i trying to communicate with this device with a Rexroth PLC (...
Replies
2
Views
1,727
joaofaria79
J
B
RSLogix 5000: More than one Generic Ethernet Module To The Same IP Address
Hello, I'm using a ControlLogix controller with 1756-ENBT to communicate with an I/O adapter using EtherNet/IP. RSLogix 5000 v13.03 is being...
Replies
8
Views
14,452
TimWilborne
TimWilborne
C
PlantPax 3.2 P_Intlk but with more than 16 i terlockd
Hello, i need to use P_Intlk and feed the Status interlock OK bit to a P_DOut block. However, there's 17 interlocks for this output. How can I...
Replies
1
Views
108
Ken Moore
Ken Moore
A
Connect a single quadrature encoder to more than one input device
Hello, friends, I am trying to upgrade a system that uses an Onrom incremental encoder (E6B2-CWZ6C) connected to a Danfoss VFD (FC360), but now...
Replies
4
Views
271
Aure_PLCs
A
A
How to send more than 127 chars through 1734-232ASC?
Hello Friends I have took the sample program from AB webpage and modified, but I can only send 127 chars...
Replies
1
Views
181
Ken Roach
Ken Roach
Back
Top Bottom