slave to slave communiation

manmeetvirdi

Member
M
Join Date
Oct 2004
Location
India.
Posts
750
Hi there
We have got two PLC both of them 400h system.
Both of them talking with each other through profibus.
Now one HMI needs to be inserted in the profibus loop which then will talk to Slave 400h system.
Is it possible?

Regards
Manmeet
 

Similar Topics

U
Setting up WAGO PFC 200 750-8216 as a Profibus Slave
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
79
udit_91
U
A
MODBUS MASTER/SLAVE PCS7 9.1 SP1
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
128
Arun Kumar Yadav
A
M
siemens Backup for non siemens slave
if we need to take back up of Siemens CPU(s7300 /s7400) with non siemens slave profibus nodes without their gsd files and when we restore it in...
Replies
0
Views
82
muzammilj
M
B
Can't read from a Micro820 Modbus Server / Slave
Hello, I set up my Micro820 with a basic mapping. When I try to run a script to read the addresses I get errors for illegal addresses...
Replies
2
Views
169
bill1995
B
M
Modicon 340 plc (unity pro) commİnİcatİon error (slave error)
HELLO MY FRİENDS ı have problem. ı tought you can solved thıs problem for me. First of all When I checked all the cable connections of the...
Replies
0
Views
401
mrtctnsu
M
Back
Top Bottom