Hirschmann IGMP setup

I am new at this networking stuff and I need some help setting up IGMP snooping on a network. Anyone know where I can go to set some info?

You can download full details of the Hirschmann switches from the Industrial Ethernet pages of the Hirschmann web-site

http://hus.hirschmann.com/English/industrial-ethernet-products/index.phtml

Been there, done that. I went through everything that came with my RS-20 and didn't find much. I am looking for information on what ports should be set to what setting. Does the processor have the same setting as the remote racks? Whitch is snooping, witch is querier? It has settings to expose to all ports, what will happen if I set it up wrong.

I set up IGMP snooping on my Allied telesys, you can find good info about IGMP snooping on www.n-tron.com, also try www.ab.com then look fo knowledgebase and inside there look for IGMP, and finally here is the info i use to to configure my switch http://www.alliedtelesyn.com/search/default.aspx?q=igmp .