Ti 545

SET UP A TI545-TISOFT-IBM COMPATABLE-S232-WIN 98 PROGRAMABLE INTERFACE
ABOUT 10 YEARS AGO. SOMEONE STOLE THE PC. CAN ANYONE TEL ME THE DIFFERENT SETTINGS I HAVE TO SET TO MAKE THE PC TALK TO THE PLC?
TISOFT 4.2

Hello Larry;
I have worked with Tisoft from version 6, so there might be differences from version 4. But basically all you need to do is set the dipswitches on the PLC for the programming port speed; the sofware will adapt the Com port speed to connect through a null-modem cable.
You can get the system manual (and more) for the TI545/555 at:

http://www4.ad.siemens.de/csinfo/li...&nodeID0=10805067&lang=en&siteid=cs&aktprim=0

Hope this helps,
Daniel Chartier