Hi I have a 1762-L40BWAR that I use for my central heating. I had a wiring fault which shorted my 24vdc input supply and now wont go, no lights or anything. I got a new one to get my heating going and HWC. I would like to fix my broken one I know the power supply is not working and I found 2 fuses F1 and F2 both are ok. Is there somewhere i could get another power supply board or get this one checked?
Micrologix 1200 Power Suppply
- Thread starter coon
- Start date
You could always send it on to be repaired at someplace like this http://www.plccenter.com/buy/ALLEN+BRADLEY/1762L40BWAR. You could also try finding a used one cheaper and try fixing it yourself.
Similar Topics
I have a microligix 1200 processor for some valve control Im trying to stop it from powering up the outputs that were on prior to power failure...
i have a micrologix 1200-L40BWA. im trying to power it up. According to my research. The VAC L1 is connected to the Hot(black) wire. VAC Neut is...
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
I have a MicroLogix 1200 that has an 8 input and a 16 output.
Every 6 months-year I get a fault and when online go to error it
is something like...
Have a bad output on a Micrologix 1200. Moved wire over to an available output, changed program to associate with new output. downloaded program...
