IAI SCON controller

supporter

Member
S
Join Date
Mar 2006
Location
Malmö
Posts
167
Hi Experts,

I need some assistance with an IAI SCON controller. We want to connect a HMI to this controller using Modbus (which should be supported by the SCON-controller). Where do we configure the Modbus station address and baudrate?

Thanks for your assistance!

//Supporter
 

Similar Topics

S
IAI SCON controller
Hi Experts, I need some assistance with an IAI SCON controller. We want to connect a HMI to this controller using Modbus (which should be...
Replies
0
Views
1,679
supporter
S
P
Adding IAI Ethernet Device to Studio 5000 PLC V32.02 - Yellow Triangle
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC. So, I think the math is correct on the Input and Output...
Replies
0
Views
143
psychosunshine
P
I
IAI PCON-CB EtherNet/IP Controller to Studio 5000 Invalid Input Size
Hi All, Can I get help with the following Invalid Input Size Fault displayed in Studio 5000. Allen Bradley: Studio 5000 V33 CompactLogix...
Replies
1
Views
1,416
irinjia
I
S
IAI MSEP Controller IP Change
I have a IAI robo cylinder controller MSEP module that I need to change the IP address in. I have the parameter software from IAI, and i am able...
Replies
0
Views
1,082
Sean Teague
S
C
Unable to setup IAI MCON IP address for connection to Siemens S7 CPU1511 Profinet IO
Hello, 1. How do I setup IAI MCON IP address for Profinet connection to Siemens S7 CPU1511? 2. I had setup name and IP address for the MCON...
Replies
2
Views
3,509
dwoodlock
dwoodlock
Back
Top Bottom