Unity Pro and S7

robcontec

Member
R
Join Date
Feb 2007
Location
Bloomfield Hills, Michigan
Posts
25
High all, been lurking on and off for a while.

I just finish a year long project using Unity Pro.

Was curious how similar Unity is to S7 (did some S7 a few years back but that code was pre written).

I've also had some recent exposure to PL7.
I've primarily work with AB and GE Fanuc 90 series before this
Thanks for the input
 
Last edited:

Similar Topics

P
Unity Pro, Issue with multiple line IO Scanning for single device.. only Two working ?
Hello, I am using Unity pro V15. I have Quantum CPU 671 and Ethernet NOE 77101 configured. I have configured IO scanning on NOE. I have attached...
Replies
5
Views
175
Para
P
M
Modicon 340 plc (unity pro) commİnİcatİon error (slave error)
HELLO MY FRİENDS ı have problem. ı tought you can solved thıs problem for me. First of all When I checked all the cable connections of the...
Replies
0
Views
401
mrtctnsu
M
P
Unity Pro XL wont start after installing.
Hi All, I haven't installed Unity Pro in years and needed to install it recently. I initially tried installing Version 11.1 and the whole...
Replies
3
Views
709
pdsdownunder01
P
J
UNITY PRO 11 SIMULATOR with modbus TCP
Hello i want to implement a Read_var / Write_var functions to communicate with a modbus tcp device at the moment i use the unity simulator at the...
Replies
4
Views
1,924
JEANST
J
P
Schneider PL7 export application to Unity Pro V12
Hi, I've exported a PL7 application to the .FEF file succesfully. Imported the .FEF file in my Unity Pro project, but two of the five sections in...
Replies
0
Views
772
pbezzina
P
Back
Top Bottom