Allen Bradlly PLC

Hello All members,
I am using AB SLC500 PLC, Processor Model 1747-L532. Could you please provide me information on hardware and programming of this type of processor.
When I installed the system at first time the processor front panel indication "FLT" shows Flahing LED. What this mean and where can I found the diagnostic and troubleshooting procedure in order to solve the problem and put the system in RUN mode.
If any one have information about web sites which help to obtain hardware and software manuals about this type of PLC please let me know.

Thanks alot for your help

Salah

you can get manuals on Rockwell Automation website:
http://literature.rockwellautomation.com/idc/groups/public/documents/webassets/browse_category.hcst

then click on "Programmable Controllers", "SLC 500 System" to get here

http://literature.rockwellautomation.com/idc/groups/public/documents/webassets/browse_results.hcst?lineTitle=SLC%20500%20System&familyTitle=Programmable%20Logic%20Controllers&categoryTitle=Programmable%20Controllers&xLanguage=EN%20-%20English&CategoryId=0012&FamilyId=0088&passedLangVal=EN%20-%20English

and you will find all manuals you need (use for example Keyword L532)

One of the most common reasons for a flashing FLT light is that the processor simply has no program installed. If this is the case it is up to you, after learning about this unit and obtaining the proper software and cables, to write a simple program, downloading it then placing the PLC in 'run'.