PV plus 1250

bigrthanur

Member
B
Join Date
Mar 2007
Location
Ohio
Posts
85
Hello

I have a PV plus 1250 communicating with 2 fanuc robots and a compact logics PLC. Currently when I do a data exchange i am going through a KEP server. My problem is when I do a data exchange i have to write a macro in the KEP ware to do this.

I would like to know if anyone has a suggestion on how to do this with out using a macro command. i would like to be able to "spam" the PLC and use the PV as a "dumb" device. I am communicating through ethernet.


Thanks
 

Similar Topics

H
AB Panelview Plus 1250 - Does not load application and boots to windows
Hey guys, I'm at a bit of a loss with a problem I'm having with some PVP 1250s and hoping for some advice. In firmware and application version...
Replies
0
Views
290
Hatandboots
H
J
PVPlus 1250 Key Assignments
Hello, I want to make touchscreen push buttons invisible based on certain conditions. When these conditions are true, these buttons will become...
Replies
1
Views
987
Ken Roach
Ken Roach
C
Connecting a poweflex 753 to a panelview plus 6 1250
is it possible to comunicate a powerflex 753 (ccw) using ethernet 20-750-ENETR card to a panelview plus 6 1250 (factorytalk view studio me)...
Replies
0
Views
1,494
caiothe
C
A
Running a VNC Server on a Panel View Plus 1250
Hello, I recently installed an **** Flexy 201 so we could monitor our PLCs (one SLC 500 and one Control Logix) remotely under a VPN. One of the...
Replies
11
Views
5,102
dmargineau
D
A
How to run a VNC Server on a PanelView Plus 1250
Hello, I recently installed an **** Flexy 201 so we could monitor our PLCs (one SLC 500 and one Control Logix) remotely under a VPN. One of the...
Replies
0
Views
2,348
acampos
A
Back
Top Bottom