osman100
Member
hi all
i have an inverter omron f7 with option card pg-b2 to use it
i have an inverter omron f7 with option card pg-b2 to use it
omron f7 inverter
- Thread starter osman100
- Start date
hi all
i have an inverter omron f7 with option card pg-b2 to use it to work as a servo motor withdigital puls train
but when i connect it with mach 3 program from arc soft touse it to move axises in cnc i found the output freq changing without changing the input puls how can u hep me
i have an inverter omron f7 with option card pg-b2 to use it to work as a servo motor withdigital puls train
but when i connect it with mach 3 program from arc soft touse it to move axises in cnc i found the output freq changing without changing the input puls how can u hep me
Similar Topics
Hello all,
I have a Omron 3G3MX2-AB004-V1 Inverter (VSD) connected via EtherCAT that I need to reference (home) and also perform a relative...
Hello gentlemen,
Another day another drive:banghead:
I have an OMRON inverter 3G3MX2 which I put in to replace a damaged one both of which are...
we have the following solar inverter, which is tripping every few seconds, with error E1-5 (Islanding passive).
What could be the real cause...
please i need a help,i have an ac motor conveyor replaced,which is controlled by omron 3g3mv inverter.how can i change the frequency of this...
Hi guys, im relatively new to the control game. have a bit of knowledge on PLC's but have never used inverters before. my question is probably...