cscape

b370w

Member
B
Join Date
Apr 2009
Location
usa
Posts
11
i use %AI to read analog input wat adress do i wanna use to store it so i can use math and monitor the value
 
You can keep it as %AI to monitor the value (read only) or move it to a %R register. I believe that you can even move it to a %AI register that is not assigned to a real I/O point...
 

Similar Topics

J
simulation setup using horner OCS using structured text (Cscape)
I am trying to set up a piece of equipment with a Horner HE-X4R. I'd like to use structured text and so far I'm just trying to get a basic On/off...
Replies
0
Views
109
jdk202
J
D
Cscape toolbars
I've just started using Horner Cscape version 9.90 service pack 11. Is it normal for all the toolbars in the window to appear in a different spot...
Replies
6
Views
219
d x l
D
G
Horner Cscape Tag based. Move real to int array
I seem to be making this harder than it should be, and Its not making any sense. I simply need to move a real variable to two integer variables...
Replies
8
Views
1,019
g.mccormick
G
S
Running average in Cscape
I am working on a program in Cscape to take a pulse input from a flow meter and output an average of the last 5 minutes of flow and total flow to...
Replies
1
Views
583
drbitboy
drbitboy
S
Cscape program
I am working on a program in Cscape to calculate a flow in gpm with a pulse input. Currently, the data collection, labeled as minute counter and...
Replies
4
Views
745
shockwave78
S
Back
Top Bottom