Programmer4
Member
I recently did a program for a this touchscreen and there are errors for system day, time, month, year. Does anyone know how to configure this so that these errors do not occur by any chance.
Panelview Plus 1250
- Thread starter Programmer4
- Start date
dmroeder
Lifetime Supporting Member
Hmmmm...
My guess is that there are tags setup in the global connections for time and date, and the tags cannot be found in the PLC. If my guess is correct, either add the tags to the PLC program, or delete the tags in the HMI application.
My guess is that there are tags setup in the global connections for time and date, and the tags cannot be found in the PLC. If my guess is correct, either add the tags to the PLC program, or delete the tags in the HMI application.
Similar Topics
Hey guys, I'm at a bit of a loss with a problem I'm having with some PVP 1250s and hoping for some advice.
In firmware and application version...
is it possible to comunicate a powerflex 753 (ccw) using ethernet 20-750-ENETR card to a panelview plus 6 1250 (factorytalk view studio me)...
Hello, I recently installed an **** Flexy 201 so we could monitor our PLCs (one SLC 500 and one Control Logix) remotely under a VPN.
One of the...
Hi,
I have a customer that has an intermittant issue with a PV+ (2711P-T12C6D1) and they would like to replace the PV+ with the latest PV+7...
I have these PLC and HMI and want to communicate them. I made a program in RSLogix5000 and FactoryTalkViewStudio, tried them out with FT station...