twido extreme pwm input

stevedunk

Member
stevedunk
Join Date
Apr 2006
Location
FNQ
Posts
52
i would like to use the extremes pwm input %IW0.8 as a frequency counter using a balluff PNP inductive prox Sn4mm 2,500hz looking at a 66 tooth gearwheel
manual appears to say it can do it
Schneider say it can be done but seem unable to show how to configure hardware and or software to accomplish this.

has anyone done this with a twido extreme?
 

Similar Topics

stevedunk
Twido Extreme
I am involved with repowering a locomotive with a Cummins QSK19 ESN 37236612. I intend to use a Murpphy PV1000 for the Display ( no gauges as...
Replies
2
Views
2,593
stevedunk
stevedunk
T
Problem with Twido TWDLMDA40DTK
Hi guys!! I'm New here and new with this type of plcs i have TWDLMDA40DTK and i need to get a copy of the program and i don't have an original...
Replies
6
Views
685
ThePhantom
T
R
Twido Read Input Address
Dear friend, how to read the input register (3xxxxx) of device from twido plc. i have tried the comm macro but it always read the holding register...
Replies
3
Views
1,567
drbitboy
drbitboy
P
Help twido program
Good, how do I control through an Analog output of a valve, that is, open the valve from 10% to 10% until it reaches 100%, and then close it...
Replies
4
Views
2,237
parky
P
R
Schneider Twido reset
Hi! I bought a secondhand Twido base unit to help me learn programming and also faultfind expansion modules (one of my customers machines uses...
Replies
4
Views
1,684
Ryan Collins
R
Back
Top Bottom