Twido - In touch

tcandeias

Member
T
Join Date
Jun 2009
Location
Portugal
Posts
3
It is possible establish communication between a Twido (Schneider) and the In Touch (Wonderware)?

In the SMC i'm using the same configuration that i´m using to communicate with a M340 (Schneider), but doesn't work.



Best regards,
TCandeias
 

Similar Topics

P
Twido PLC (Modbus) and InTouch
Hi all Can anybody connecting Schneider's TWIDO PLC with Intouch SCADA by Modbus ?
Replies
0
Views
4,425
picasso
P
T
Problem with Twido TWDLMDA40DTK
Hi guys!! I'm New here and new with this type of plcs i have TWDLMDA40DTK and i need to get a copy of the program and i don't have an original...
Replies
6
Views
686
ThePhantom
T
R
Twido Read Input Address
Dear friend, how to read the input register (3xxxxx) of device from twido plc. i have tried the comm macro but it always read the holding register...
Replies
3
Views
1,567
drbitboy
drbitboy
P
Help twido program
Good, how do I control through an Analog output of a valve, that is, open the valve from 10% to 10% until it reaches 100%, and then close it...
Replies
4
Views
2,238
parky
P
R
Schneider Twido reset
Hi! I bought a secondhand Twido base unit to help me learn programming and also faultfind expansion modules (one of my customers machines uses...
Replies
4
Views
1,687
Ryan Collins
R
Back
Top Bottom