Steve Bailey
Lifetime Supporting Member + Moderator
GE and Fanuc dissolve joint venture
- Thread starter Steve Bailey
- Start date
Correct me if I am wrong, but GE gets to keep the software (Proficy, Cimplicity, etc.) and the automation hardware (PLC's), while Fanuc gets CNC and robotics.
To me it seems like a natural progression - the Fanuc stuff (CNC/robots) always seemed to have less of the GE corporate influence.
To me it seems like a natural progression - the Fanuc stuff (CNC/robots) always seemed to have less of the GE corporate influence.
You are not wrong, but to keep things accurate, robotics were never part of the joint venture.
Dua Anjing
Member
How about..GE and Seimens are going to collaborate on a combined Software Platform that will allow common access between ALL plc's now in their stable and they are calling it.......
.
.
.
.Step9...
John M
Member
- Join Date
- Mar 2004
- Posts
- 85
How about..GE and Seimens are going to collaborate on a combined Software Platform that will allow common access between ALL plc's now in their stable and they are calling it.......
.
.
.
.Step9...
Close but I think they are calling it Step Nein!
Similar Topics
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
I want to buy this program if anyone has it. Absolutely no one has it officially for sale.
My cpu is IC610CPU104B
My mail...
I've got a Micrologix 1100 with ethernet and I'm trying to configure communications to a Fanuc R30iB controller. I'm pretty sure you have to set...
We recently purchased a IC693CPU352 module and it appears the internal time clock is static. I can set the time and date but once set it does not...
I have one GE Fanuc IC200PNS002-AC Versamax Network Interface Module and the fault red light is blinking and i have checked in manual it is...