Allocating slot number

imanh

Member
I
Join Date
Jul 2009
Location
tehran
Posts
21
Hi
I want to install a FM 357-2 module.. it says in its manual that I must allocate a slot number to modules . How should I do this?
 

Similar Topics

R
Siemens PLC SIM "Error when allocating local data"
Hi I have the attached code and am testing it using PLC SIM. The PLC goes to STOP mode with an "Error when allocating local data", requested...
Replies
6
Views
3,959
L D[AR2P#0.0]
L
Y
S7 going in to Stop Mode 'Error Allocating Local'
Hi All, I have a S7318 and it will not go into Run Mode. The Diagnostic Buffer says 'Stop caused by Error When Allocating Local Data'...
Replies
4
Views
3,995
ylade
Y
V
Honeywell HC900 rack/slot error
Hey Guys, I am getting random rack/slot errors. I go to download and everything is ok but then it has a error. For example - Yesterday everything...
Replies
1
Views
363
tdoa
T
A
ControlLogix: IO adapter/extender slot allocation
Hi All What I understood from various manuals (e.g. rm094 & um543) is that you have the freedom to allocate any module to any slot. I understand...
Replies
5
Views
647
AREDA
A
D
Error 8097: Controller Error - CPU Slot Mismatch
Error 8097: Controller Error - CPU slot mismatch [0x05][0x46] [0xC00C0001] I got that error above when I was trying to download my programming to...
Replies
2
Views
412
Steve Bailey
Steve Bailey
Back
Top Bottom