S7-300 with a rotary pulse encoder

msolano

Member
M
Join Date
Aug 2009
Location
El Carajo
Posts
22
i will be able to use a rotary pulse encoder model 1xP8001-1, in this time the swiching is too slow, and i don't need a fast i/o, I will be able to use a IM 153-1 (with ET 200M)

how can i implement it? :confused:
what is the logic needed?o_O

extra info
output diagram

the model is a bidirectional with maker

outputwaveform_diag.gif



thanks a lot!!!! 🍺
 
Last edited:

Similar Topics

andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
32
andyvanosdol
andyvanosdol
A
I/O access error on S7-300
Hi Siemens guys! I am experiencing SF fault on our S7-300 (6ES7 315-2AH14-0AB0) CPU from time to time. I've checked the diagnostic buffer and...
Replies
13
Views
174
JesperMP
JesperMP
B
Kinetix 5300 MSO causing ExcessiveVelocityErrorFault
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
144
padees
P
O
Re-Zero a Kinetix 5300/MPAI Electric Cylinder
Hello PLCS.Net Forum, First time posting. Let's assume I am a novice. BASIC PROBLEM: My servo/linear piston is no longer zeroed to the...
Replies
9
Views
218
OhNo
O
J
BCD Conversion error in s7 300 cpu 313C
hi... i have an issue in s7 300 plc, while we run the machine(in idle there is no fault) , plc cpu goes in SF mode, after restart the power cycle...
Replies
2
Views
117
L D[AR2P#0.0]
L
Back
Top Bottom