What TCP/IP Port does Siemens Use

Michael Hunt

Member
M
Join Date
Nov 2008
Location
Leeds
Posts
75
Hi

I am trying to open up a route on our network to talk to S7 PLC's. Is there any other port other than 102 that Siemens use.
 

Similar Topics

W
how to change tcp port in S7-1200
Siemens s7-1200 is set to 102 as the default port, is there a way to change it to another port?
Replies
2
Views
821
mk42
M
B
Pinout Modbus TCP onto S7-1200 through profinet port
Hello All I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
Replies
4
Views
1,613
the_msp
the_msp
J
Mitsubishi Modbus TCP (Predefined Protocol Support Funtion)
How to program (Ladder) Modbus TCP on Mitsubishi FX5CPU using its Predefine Protocol Support Function
Replies
1
Views
1,674
goghie
G
B
RsLinx Communication via TCP Port Forwarding
Hi everyone, I have a customer that is using wireless modem to communicate to many different PLC's and HMI's. I just added my PLC and HMI to...
Replies
6
Views
3,807
Geospark
Geospark
D
Can an RX3i CPU communicate via Modbus TCP and EGD on one ethernet port?
After reading through some older threads and checking out my old friend GFK-2224, it sounds like an RX3i CPU can talk Modbus TCP, this much I'm...
Replies
1
Views
1,473
rkicklighter
R
Back
Top Bottom