Cp 341 communication error

dips_b

Member
D
Join Date
Oct 2009
Location
pune
Posts
1
Hello everybody ;

I am working on communication betwwen siemens s7-313 cpu & a modbus slave by using CP 341 module but i am getting error no 301h in status word of FB 8 ( Send_rcv) do somebody explain for what this error stands for

Thanks in advance

Dips
 

Similar Topics

S
CP 341 Communication Error
All, Trying to commission a CP341 modbus link. Have monitored some variables below FC61 Send data to slave DB40.DBX0.5 DB40.DBW 12 DB40.DBW 14...
Replies
0
Views
4,079
sammmy_s
S
G
No communication between PC341 and partners
Please help! PC341 is no more communicating with his two partnes: no communication LED blink, no SF LED. The associated CPU S7-414 (H...
Replies
2
Views
1,385
tuekam gabriel
T
G
S7 CP341 datafiltering/parsing best way to do it? (serial communication)
Hello, I'm busy with software to receive RS232 (ASCII) from a PC. The software what i made works BUT... My sofware is based on receiving frame...
Replies
0
Views
1,549
genesisfm
G
R
Communication CP341-RS232C Siemens
Hi, I got a problem getting the CP module to work. I can access it and set the parameters of the module. Im trying to send a message using the...
Replies
2
Views
3,369
RoRo
R
J
Communication Between Siemens Cp341 Modbus Master And More Than One Slave Setup
Hi Friends, In my one of the Project Using Siemens CP341 ( Communication Processor). I am facing problem for modbus communication between CP341...
Replies
0
Views
5,026
jtarasu
J
Back
Top Bottom