I am trying to get an FR-F740 work under Profibus QJ71PB92D Master Module, using FR-A7NP GX_Configurator DP and DpInvQ function block. Whilst no error occurs and SEND/RECEIVE LED is flicking, i can't write any values to inverter through Q02 CPU. Has anybody been here before?
Mitsubishi Inverter control FR-A7NP
- Thread starter Yorgos
- Start date
Similar Topics
Hi,
I am trying to create a program for the 5U that can communicate to 2 or 3 VFDs (individual control, not broadcast) using the inverter...
Evening all,
Currently stuck in the office trying to get a working bit of program together for a Mitsubishi FX3G to control two FR-D720S...
Hello everyone!
I am the beginner with PLC's.
I have a plc mitsubishi fx5, and i want to control inverter by built-in analog in that plc.
I set up...
I need to control motor speed of inverter mitsubishi by use plc omron write ladder who can give me sample and diagram for connect wire
I have Toyopuc PLC PC10G-CPU and some communication modules of it. With this modules I'm able to connect with Ethernet, Ethernet/IP, FLnet, FRMT...