DeviceNet mapping on SLC500

ruby.n

Member
R
Join Date
Dec 2009
Location
USA
Posts
48
Hi,

I have a Devicenet scanner and its various data i.e. addresses. How to I read these using my SLC500 PLC?
 

Similar Topics

S
Devicenet input mapping
I have to modify a device net network by adding two nodes(VFDs) to the network.Please advice me how i can map input and output to PLC...
Replies
0
Views
1,674
srv
S
A
DeviceNet Mapping issue
Hi Guys There is a tester on my floor, using SoftLogix, 1784-PCID interface, 1734-ADN Adapter and 1734-IB2. when I open the PLC program, the...
Replies
2
Views
1,663
angi
A
D
SMC Devicenet Mapping to Omron CJ1W-DRM21
Hey All, Looking for some direction on how to map a SMC EX250-SDN1 SI unit to an Omron CJ1W-DRM21 device net scanner. The manual says that it...
Replies
1
Views
3,100
drock
D
C
1794-IF4I DeviceNet Mapping
All, We are using DeviceNet for remote I/O modules. I have configured an alia tag for each digital input and output. For Example: TYPE TAG...
Replies
1
Views
2,295
CSnerd
C
P
Devicenet Mapping
When the input and output areas of my devicenet scanner are mapped to my E3 overload relays, the 4 input assembly words are mapped to 2 x 32 bit...
Replies
5
Views
3,569
Gerry
G
Back
Top Bottom