Cqm1-od213 ??

mosama · Feb 25, 2010

Hi every one

I'm using OMRON transistor output module CQM1-OD213 with 32 outputs. The data sheet states that Max. Switching Capacity is 16 mA at 4.5 VDC and 100 mA at 26.4 VDC.
Is this max. switching capacity for all 32 output points or for every point??

bluebyu · Feb 25, 2010

Reference manual w363, page 66. I believe it varies per point based on the voltage. the max per point at 4.5VDC is 16ma.
Different blocks of outputs can have different voltages, and than different max ma.

http://neo.dmcs.p.lodz.pl/~piotrowi/kisp/omron.pdf

Hope this helps

mosama · Feb 26, 2010

bluebyu

So it is the maximum switching capacity per point

Thank you very much

gtsuport · Feb 26, 2010

The numbers you listed are maximum current per point based on voltage.

There is a single common on the module, so all outputs must be the same voltage.

There is a 3.5 amp fuse in the module, so maximum current draw will be limited to 3.5 amps.

Hope this will help.

mosama · Feb 26, 2010

gtsuport

Thanks very much

bluebyu · Feb 27, 2010

Thanks for the correction GT

Cqm1-od213 ??

mosama

Member

bluebyu

Member

mosama

Member

gtsuport

Member

mosama

Member

bluebyu

Member

Similar Topics