Twincat NT_**** (FBs)

Hi Guys,


Do the NT_ FBs can be used on a CE system?

And what is T_AmsNetID?

Kind regards,
Jo

Hello PlayerByNature. You should check each individual function block that you want to use. For example, NT_Shutdown is documented here...
http://infosys.beckhoff.com/content...cplclibutilities_nt_startprocess.htm?id=11381

At the bottom of the page, it indicates that as of 2.10 build 1301, both the x86 (CX1xxx, CE or XPe) and ARM (CX9xxx, CE Only) target systems are supported.

T_AmsNetID is the AMS Net ID of the Beckhoff Station to execute the function on. For example, one PLC can execute the code for an NT_Shutdown on a remote PLC over the network.

If you simply leave the NetID feild blank, it will assume the local machine and shut down the local machine.