Fatek Modbus

asdf1

Member
A
Join Date
May 2010
Location
AS
Posts
2
Unfortunately I have a little problem with the Modbus, and although I do not get the data from master> slave and slave> master!
Can me send anyone please maybe a small test program that I can find out where my mistake is?

Master PLC: Fatek FBs-32MC
Slave PLC: Fatek FBs-10MA


I know, my english is not very well =)


best regards
 

Similar Topics

A
FATEK modbus TCP communication fail with energy meter
Hi, i cant establish communication between fatek plc with an energy meter, both capable for modbus tcp, i did with modscan but fatek plc does not...
Replies
1
Views
151
plctobal
P
K
Fatek modbus data reading
Hi, I have been struggling for a week with FATEK FBs-24-MAR-AC PLC. My goal is to read voltage and current from a powermeter Elnet Pico 5. The...
Replies
8
Views
3,790
danw
danw
Z
Delta HMI and Fatek PLC Communication over Modbus TCP
Dear all, Please Let me know how to setup the communication between Delta HMI(DOP-B Series) and Fatek(60-MC). What is Control Block and status...
Replies
3
Views
4,870
gclshortt
gclshortt
P
Communication Modbus S7-1200 - Fatek FBs-MA
Hello everyone, I have a problem with communication Modbus between PLc Siemens S7-1200 and Fatek FBs-10MA. In Siemens and Fatek I uses the...
Replies
4
Views
6,360
Papillon
P
K
Fatek PLC and Intouch Wonderware MOdbus TCP/IP Communication
Hi all, I'm currently doing a project which is using Fatek PLC and In Touch Wonderware as my SCADA monitoring. I'm facing problem on the...
Replies
3
Views
11,060
flowdam
F
Back
Top Bottom