Telemechanique and Scada software

eyad267

Member
E
Join Date
Jun 2009
Location
amman
Posts
62
Hi all,

My company wants me to make a scada software for Schneider, and i never actually worked on it before, and i was wondering if you can help me with the hardware needed

The plc used is Telemechanique TSX3721
1- What is the name of the software used for telemechanique? modicon?
2- what is the software used to program scada software?
3- I should use ethernet adapter on both PC and PLC right?

Any other thing i have to know?

Thanks
 

Similar Topics

M
Twido suite and Telemechanique PLC
Hi, I created a program and compiled it with no errors, changed the program hardware configuration to match the plc. If I try to connect I...
Replies
2
Views
1,911
Lare
L
B
Telemechanique TSX 17 Programming
Hi All, We have a problem with a machine not working. Upon looking we found it has a Telemechanique TSX 17 PLC. I was going to look at buying...
Replies
0
Views
1,332
BrendanDixon
B
chrisj91
Modicon Telemechanique PL7 - Mapping I/O to Memory
Been a while since I've posted but here goes: I'm using an old Modicon Telemechanique Premium PLC Model: TSX 572623 w/ Ethernet (now taken over...
Replies
1
Views
1,764
chrisj91
chrisj91
ganutenator
Telemechanique sd memory card for M340
Why are these things anywhere from $150 - 250? A unix bit by bit copy of the card doesn't work. Anyone smart enough to reverse engineer the...
Replies
4
Views
3,175
Lare
L
mjisaacs
Idec MicroSmart vs. Telemechanique Twido
I saw a blurb somewhere one time that Idec MicroSmart series PLRs were rebranded Twido's (or the opposite). I have never used the Idec series, but...
Replies
1
Views
2,607
c505ber
C
Back
Top Bottom